Instructions

34
• Ifbatteriesareusedforthepowersupplyofthetransmitter,makesurethatthereisasufcientrest
capacity (battery checker). If the batteries are empty, always replace the complete set, never individual
cells only.
• Before each operation, control the settings of the trim slider at the transmitter for different steering direc-
tions and, if necessary, set them.
• Alwaysswitchthetransmitteronrst.Itisonlyafterwardsthatyoumayconnecttheightbatteryofthe
modelorswitchthemodelon.Otherwiseunexpectedreactionsoftheelectricmodelairplanemayoccur
and the propeller can start to turn unintentionally!
• Check the correct and secure position of the propeller before each operation.
• Makesurethatneitherobjectsnorbodypartsareintherotatingandsuctionareaofthepropellerwhile
it is rotating.
c) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment is solely
down to you being responsible when dealing with the model.
• Improper operation can cause serious damage to people and property! Therefore, during operation,
ensureasufcientsafetydistancetopersons,animalsandobjects.
• Select an appropriate site for the operation of your model airplane.
• Flyyourmodelonlyifyourabilitytorespondisunrestricted.Theinuenceoftiredness,alcoholormedi-
cine can cause incorrect responses.
• Do not direct your model towards spectators or towards you.
• Motor,ightcontrolsystemandightbatterycanheatduringoperationofthemodel.Therefore,takea
breakof5-10minutesbeforere-chargingtheightbatteryorbeforere-startingwithapossiblyexisting
spareightbattery.Thedriveenginemustcooldowntoambienttemperature.
• Always leave the remote control (transmitter) turned on, as long as the model is in operation. After land-
ing,alwaysdisconnecttheightbatteryrstorswitchthemodeloff.Itisonlyafterwardsthattheremote
control may be turned off.
• Incaseofafaultoramalfunction,correctthefaultrstthenre-startthemodel.
• Don’texposeyourmodelandtheremotecontrolforalongerperiodoftimetodirectsunlightorexces-
sive heat.
• Afteruse,theightbatterymustbedisconnectedfromthemodelandthetransmitterswitchedoff.Re-
movethebatteriesfromthetransmitterforextendedstorage.