Instructions

32
The following components not included in delivery are required for assembly and operation:
Assembly:
Cutterknife,5-minepoxyresin,possiblythixotropicagents(micro-balloonorcottonock)forthickeningtheresinor
EPO super glue with activated spray and a little sand paper.
Attention!
Observe the safety information of the respective manufacturer when using glues and work with glues in
well-ventilated rooms only.
Operation:
Tochargetheightbattery,asuitableLiPo-chargerandachargingcablewithT-plugarerequired.AnotherfourAA/
Mignon batteries are required for operation of the transmitter (high-quality alkaline types are recommended).
See our website www.conrad.com for tried and tested accessories.