Instructions

41
13. Technical data
a) Ship model
Boat's body length ............................................640 mm
Full length .........................................................945 mm
Width ................................................................195 mm
Height ...............................................................120 mm
Ship's propeller .................................................D35 CNC Propeller
Weight ready to run ..........................................from approx. 1250 g
Control ..............................................................2 channels ( forward, left/ right)
Minor changes to the dimensions possible for production reasons.
b) Engine
Operating voltage .............................................4 LiPo ( 14.8 V)
Current load capacity ........................................65 A
Revolutions per Volt ..........................................1750 KV
Number of poles ...............................................4
Shaft diameter ..................................................5 mm
c) Speed controller
Input voltage ....................................................3 cells LiPo (7.4 to 22.2 V)
Current load capacity ........................................Permanent current 90A, short term (1 s) max. 540 A
SBEC-output .....................................................6 V/DC, 5 A
Programmable ..................................................driving mode; number of cells, undervoltage and timing
Overtemperature protection ..............................switch-off at > 100°C
Plug system ......................................................XT60
d) Recommended drive battery
Rechargeable battery voltage ...........................4 cells LiPo ( 14.8 V)
Battery capacity ................................................as of 4500 mAh / 30C
Plug system ......................................................XT60