Instructions

43
• When the aircraft
automaticallyiesbackward
slowly, press the forward
trim button (5) until the
aircraftisinhoveringight.
Fig. 8
• When the aircraft
automaticallyiesleftward
slowly, press the rightward
trim button (17) until the
aircraftisinhoveringight.
• When the aircraft
automaticallyiesrightward
slowly, press the leftward
trim button (15) until the
aircraftisinhoveringight.
b) Headless Mode
Headlessmodeisarelativecontrolmode,i.e.nomatterthealignmentofthequadrocopter,itwillalwaysytothe
right when viewed from the pilot’s position when steering to the right - no matter if the model points backwards, to the
left, front or right with the camera (= front). The quadrocopter is shown the direction into which it is to go with the right
control lever (nod and roll) at all times.
Fig. 9
directional
Front
• Start and Setup: When the power is turned on, normally the front side
of aircraft is the front side of headless mode after frequency matching.
If impacted or deviated on front side, please restart the aircraft again to
adjust the direction you need for frequency matching. When pressing the
headless mode button (8) the transmitter makes a beep sound and the
twofrontLEDlightsontheaircraftwillashindicatingthattheheadless
mode starts.
• Exit the headless mode: Press the headless mode button again. The
transmitter makes makes a beep sound and the LED lights are solid bright
indicating to exit the headless mode.