Instructions
33
• Check the functional reliability of your model and of the remote control system (transmitter). Watch
out for any visible damage such as damaged mechanics (e.g. rotors), defective plug connections or
damaged cables. All moving parts on the model must run smoothly but must not have any tolerance in
the bearing.
• Check before each operation the correct and secure position of the rotors.
• Theightbatteryrequiredforoperationmustbechargedbeforeoperation.
• Ensurethatthebatteriesinthetransmitterhaveasufcientremainingcapacity(transmitterindication).If
the batteries are empty, always replace the complete set, never individual cells only.
• When the rotors are running, make sure that neither objects nor body parts are in the rotating and suction
area of the rotors.
c) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment depends
completely on your responsible use of the model.
• Improper operation can cause serious damage to people and property! Therefore make sure to keep a
sufcientlysafedistancefrompersons,animalsorobjectsduringoperation.Nevertrytograbtheying
model with your hand!
• Select an appropriate location for the operation of your model.
• Fly your model only if your ability torespond is unrestricted. The inuence oftiredness, alcohol or
medication can cause incorrect responses.
• Do not direct your model towards spectators or towards yourself.
• Motors,motorregulatorandightbatterycanheatupduringoperation.Forthisreason,takeabreakof
5to10minutesbeforerechargingtheintegratedightbattery.
• Neverswitchofftheremotecontrol(transmitter)whilethemodelisinuse.Afterlanding,alwaysrst
disconnect the battery from the quadrocopter. Only then may the transmitter be switched off.
• In case of a defect or a malfunction, remove the problem before using the model again.
• Never expose your model or the transmitter to direct sunlight or excessive heat for an extended period
of time.
• In the case of a severe crash (e.g. from a high altitude). The electric gyro sensors can be damaged.
Therefore,fullfunctionalitymustbetestedbeforeyingagainwithoutfail!
• Ifthequadrocoptersuffersanimpactthatresultsinanyalterationofitsightcharacteristics,pleasestop
using it immediately.
• Switch off the rotor motors at once after a crash. Rotating rotors may be damaged if they come into
contactwithobstaclese.g.overcharging.Beforeyingagain,theseshouldbecheckedforpossibletears
or breakages!
• To avoid damage to the model through crashing due to low voltage or deep discharge of the rechargeable
battery through total discharge, we recommend that you respect the low voltage light signals without fail.
• Bearinmindthatthequadrocoptermustbeownatleast2-3meteresfromtheoperatororfromother
persons that happen to be in the vicinity, to ensure that it cannot hit anybody in the head, face or body.
• Keep all parts of the body away from the rotors at all times when they are moving.