Instructions

45
The back of the drive shaft must be lubricated on a regular basis. Lubricate the shaft when the amount of water that
leaks into the hull is higher than usual and/or when the motor makes an unusual noise.
Removetheshaftonaregularbasis.Detachthearminthehull(seeg.11),andthenpulltheshaftoutofthebackof
the boat. Clean the shaft and lubricate it with a thin layer of biodegradable lubricant (C). Replace the shaft by following
the above steps in the reverse order.
 Metalscrewconnectionsmustbesecuredwithlocknutsoradropofthread-lockinguidtopreventthem
from becoming loose.
Figure 7