Instructions

c) Installing the Smartphone holder

InstalltheSmartphoneholderonthetransmitter(gure15)andinsertyourSmartphoneintheholderasshownin

gure15.TheholderissuitableforSmartphoneswithawidthofmax.80mm.WheninstallingyourSmartphone,

ensurethatyouneitherdamagethehousingnorpush/damageanybuttons.ObserveatighttoftheSmartphone

during transport or operation of the transmitter.

Figure 15

d) Make the model ready to start

Makeyourquadrocopterreadyforoperationbyinserting/connectingtheightbattery,bindingthequadrocoptertothe

activated transmitter, installing the camera on the holder and connecting the connection cable of the camera to the

quadrocopter(seegure16).

Figure 16