Instructions
47
10. Safety Devices
The quadrocopter has arangeof safety devices inthetransmitter and ight modelwhichprotectthe
model from damage and/or should reduce possible damage to a minimum. The protection mechanisms are
identiedbyLEDindicators(model)oranacousticwarningsignal(transmitter).
a) Transmitter
The battery condition is continually inspected while the transmitter is in operation. If the voltage level of the batteries
dropsbelowacertainvalue,thetransmitterwillsignalthiswithanintermittentwarningsoundandpermanentashing
ofthe LEDatthetransmitter(gure3,item2).Inthiscase,stopyingatonceandreplacethebatteriesofthe
transmitter.
b) Model
The LEDs in the quadrocopter show if the transmitter is "bound" to the model and reception of the control signal is
proper.ThisisdisplayedbypermanentlylitLEDs(gure5,item5).WhentherearLEDsash,thequadrocopterdoes
not correctly receive the transmitter signal. In this case, "binding" must be performed again.
The quadrocopter constantly monitors the voltage of the connected battery. Should this fall below a critical level over
aparticulartimeframe,thiswillbeindicatedbytheashingLEDs(gure5,item5).
Ifthevoltageundercutispermanentlybelowaspecicvalue,anemergencylandingisinitiatedafterabrieftimeand
the motors are switched off.
IftheundervoltageisdisplayedatthequadrocopterbyashingofallLEDs,onlyapprox.oneminuteight
time remains to independently return the model to the starting point and land it. If a certain voltage level
oftheightbatteryisreached,thecontrolwillbeswitchedoffbythetransmitterandautomaticlandingis
initiated.Thisprocesscannotbeinuencedbythetransmitteranymore.
If the model is above a body of water, tree, house, street, persons, animals, etc. at the time and/or if the
modelisyingmorethan1.5metresaboveground,themodelmaybedamagedorlostandtheremaybe
property damage and injury to persons/animals nearby.