Instructions

32
e) Basic Information Relevant to the Control of the Model Helicopter
Beforeyouyyourmodel,youshouldrstfamiliariseyourselfwiththecontrolpossibilitiesopentoyouandthereby
beabletoysafely.Themodelhelicopteriscontrolledviathetwocontrolleversattheremotecontroltransmitter.
The following functions are available:
Pitch Function
Withthepitchfunctionyoucancontroltheyingheightofthehelicopter(seegure8).Theleftcontrollever(also
seegure1,item7)isusedforcontrol.Itcanbemovedupwardsfromthelowerposition,intowhichitreturnsdue
toaspring.Sincetheanglesofattackoftherotorbladesarenotmodiable,settingtheyingheightiseffectedviaa
commonspeedmodicationofthetworotors.
If the control lever is in the lower position, the motors and the rotors stop. If you push the control lever upwards, the
two rotors start up and increase their speed according to the position of the lever. When the control lever reaches the
centreposition,thehelicoptershouldyforwardwhilemaintainingheight.
Figure 8
Caution, important note!
 Thehelicopterisbuilttobeslightlyheavierinfrontexworkssothatitindependentlystartsyingforward
after take-off.