Manual

45
Disturbances on the radio channel used (e.g. other models, radio transmissions from other devices, Bluetooth
®
,
Wi-Fi) or adverse transmission/reception conditions could also be a cause for unusual vehicle responses.

If the drive battery is empty, wait for at least 5-10 minutes until the motor and speed controller have cooled down.
You can then use the vehicle again with a fully charged drive battery.
The following images are for reference only and do not necessarily correspond to the design of the trans-
mitter included with the product!

Use the throttle lever to control forward and reverse travel and the motor brake as follows:
– Release the throttle lever (move it to the neutral position); the vehicle should roll to a halt or stay stationary (if
necessary, adjust the trim for the drive function on the transmitter).
– Drive forward, slowly pull the throttle lever towards the handle
– Move the throttle lever away from the handle at one stroke to cause the vehicle to move forward and brake
(the vehicle decelerates quickly rather than coming slowly to a standstill).
– Drive forward, brake and then drive in reverse: Push the throttle lever away from the handle (braking) at one
stroke; when the vehicle is stationary, move the throttle lever to the neutral position briey (approx. 1 second),
then push the throttle lever away from the handle (the vehicle will now reverse).
Drive forward Brake
(motor brake)
If the vehicle is
stationary, wait for a
moment
(1 second)
Reverse