Instructions

13
d) Power OFF
Important: Turn the receiver OFF rst, and then turn the transmitter OFF.
1. Switch the receiver power supply OFF.
2. Switch the transmitter POWER OFF.
11. Controls
a) Transmitter channels
Channel Description
CH1 Steering servo
CH2 Throttle servo
CH3
AUX servo switch (three-positions).
For example, the three-switch positions affect the servos as follows:
v CH4
AUX servo button (minimum / maximum).
Pressing the button will switch the PWM between 1000 µs (min.) and 2000 µs (max.).
The default output of CH4 is 1000 µs.
For example, each button press affects the servo as follows: