Instructions

10
b) Receiver / antenna
CH4
CH3
CH2
CH1
LED
+ -
VCC
GND
Signal
LED
Antenna
Channel Description
CH1 Steering servo
CH2 Throttle servo
CH3 AUX servo
v CH4 AUX servo / battery connector
The battery can connect to any channel.
CH3 and CH4 can be used for various switching tasks or additional control functions such as lighting
circuits.
8. Transmitter batteries
Important
• Do not use lithium batteries. The output voltage may not be sufcient and can trigger the low battery warn-
ing.
• Replace the batteries when the G.LED on the panel ashes.
1. Remove the battery compartment cover.
2. Insert 4x AA batteries matching polarity as shown inside the compartment.
3. Replace the battery compartment cover.