Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 232630, 232631, 232632, 232633, 232634,
232635, 232636, 232638, 232639, 232640
Material Safety Data Sheet
8. Exposure controls/personal protection
Control Parameters
Occupational Exposure Limits
None of the components have assigned exposure limits.
Appropriate Engineering Controls
Eye wash facilities and emergency shower must be available when handling this product. Ventilation and other forms of
engineering controls are preferred for controlling exposures. Respiratory protection may be needed for non-routine or
emergency situations.
Individual protection measures, such as personal protective equipment
General information:
Eyewash bottle with clean water. Use only in well-ventilated areas. When using do not eat, drink or smoke. Wash hands after
handling.
Eye/face protection:
Safety glasses with side shields
Skin Protection
Hand Protection:
Use chemical-resistant, impervious gloves.
Other:
Wear suitable protective clothing and eye/face protection.
Respiratory Protection:
If inhalation exposure is expected, NIOSH/MSHA approved respiratory protection should be worn. Supplied air respirators may
be required for non-routine or emergency situations. Respiratory protection must be provided in accordance with OSHA
regulations (see 29CFR 1910.134).
Hygiene measures:
Avoid contact with skin and eyes. When using do not eat, drink or smoke. Wash hands after handling. Observe good industrial
hygiene practices.
Page 4 of 11