User manual
28
b) Recording Videos
First switch on the transmitter and then the quadrocopter. If the memory card has not been inserted or not correctly
inserted, the LED of the camera electronics (see gure 20, item 3) will ash red. If the memory card is inserted cor-
rectly and has been recognised by the electronics, the LED will not be lit.
The camera unit is now ready for operation.
To record a video, push the operating button for the video
function once briey (see gure 1, item 10). The remote
control issues a brief signal sound to conrm and the LED
of the camera electronics remains lit after a short time.
To terminate the video recording, push the operating but-
ton for the camera function again. The LED of the camera
electronics goes out.
Caution, important!
The video recording must be terminated by operating button in any case, since the video data recorded
cannot be read from the memory card otherwise. Try ying the quadrocopter as stably as possible during
the video recording to keep the clip from looking blurred.
c) Recording Photographs
To record a picture, briey push the operating button for
the photo function (see gure 1, item 3). The remote con-
trol emits a brief signal sound as conrmation. The red
LED of the camera electronics will come on briey and
then go off again to indicate that the picture has been
saved.
Figure 21
Figure 22