User manual
26
14. Return Function
The quadrocopter has a return function where it ies backwards independently. This is the opposite direction from
that in which it was aligned when switching on (see gure 18, ill. A). As in headless mode, it is not relevant in which
direction the front of the quadrocopter is currently pointing (see gure 18, ill. B).
Important!
The return function should only be activated when the quadrocopter has moved too far away from the pilot
in the previously specied forward direction and the pilot forms one line with the quadrocopter in the forward
direction. If the quadrocopter is offset to the side, it may y past the pilot to the side when the return function
is activated, and thus y away again (see gure 18, ill. C).
Return Function
Return Function
Figure 18
To activate the return function, briey push the button for
the return function (also see gure 1, item 7). To indicate
that the return function is activated, the transmitter will
continually issue signals in a rhythm of 2 and the red and
green LEDs in the quadrocopter will ash in a rhythm of 3.
The quadrocopter will now independently y contrary to
the previously specied forward direction.
When the quadrocopter has own backwards far enough,
push the control lever for the nod and roll functions (also
see gure 1, item 4) in any direction to terminate the return
function automatically.
The signals of the transmitter will go out and the LEDs in
the quadrocopter will remain lit.
Figure 19