User manual
14
The operating system does not recognize any new hardware after connection, because the USB port is only used
for power supply. Please observe that the USB ports of your computer/notebook are usually only active when the
computer/notebook is switched on.
Therefore, we recommend to only connect the charging cable to a computer/notebook that is switched on.
Important!
Only charge the ight battery in the quadrocopter via the enclosed charging cable. Never try to charge the
rechargeable battery in the quadrocopter with any other or unsuitable charging aids!
b) Checking the Drive
Before commissioning your quadrocopter, you need to
check the drive. Only when all four propellers run smoothly
and perfectly round can the model y with the lowest en-
ergy consumption. For this reason, you should check the
drive propeller function briey before each ight.
For this, turn every single propeller carefully with your n-
ger and check concentricity and smooth operation.
Observe the rotating directions of the different propellers.
Two propellers turn clockwise (B) and two propellers turn
counter-clockwise (A) when viewed from above.
Figure 5