User manual
12
b) Switching on the Transmitter
Move the control lever for the pitch and yaw functions
(also see gure 1, item 9) to the bottom position right at
your body.
Slide the on/off switch (also see gure 1, item 6) from the
left position "OFF" to the right position "ON".
The transmitter emits a brief signal sound and the LED
display (also see gure 1, item 1) starts to ash.
Slide the control lever for the pitch and yaw functions all
the way up and then all the way down again. The transmit-
ter emits a high signal sound and the LED display is now
lit permanently.
Then switch off the transmitter again with the on-off switch.
If the power supply is no longer sufcient for proper opera-
tion of the transmitter, the LED ashes (see gure 3, item
1) every 3 seconds and the remote control emits an alarm
sound at regular intervals (approx. every 8 seconds).
In this case, terminate ight operation of the quadrocopter immediately and insert a new set of batteries in the trans-
mitter.
Figure 3