User manual

39
15.22 “Models” function
This function permits naming up to 20 different models and saving
themwith all the programmedinputs. Youcan, e.g., programme
and save one and the same model several times with different se-
tups(e.g.“Setupdry”or“Setupwet”).Upto13characterscanbe
used for the model name. Spaces count as characters for this as
well.
“Select model”:
Selectthe requiredmodelfrom thelist.Tapthe“Back” buttonto
activate the selected model and return to the previous menu.
“Reset model”:
Selectamodeltobedeleted.Conrmthatyoureallydowantto
delete the model. Tap the “Back” button to save the new values and
return to the previous menu.
Only the individual settings are deleted from the selected
model,thememoryforthemodelremainsthesame.
“Name”:
Enter a name for the model. Tap the “Back” button to save the new
values and return to the previous menu.
“Copy model”:
Selectamodeltobecopied.Then,selectamodeltobeoverwrittenwiththenewdata.Tapthe“Back”buttontosave
the new values and return to the previous menu.
The selected model is replaced by the copied model. All previous settings are thus deleted irrevocably.
Figure 33