User manual

38
 Thetimercontinuestooperateevenwhenthesettimehasbeencounteddown.Inthiscase,theproduct
automatically switches into “Up timer” mode.
 Inthiscase,ashortsignalsoundsaftertheendofthesettimeifthesoundisactivated(seemenuitem
“Systems”).
Times between 1 minute and 99 minutes can be set.
“Lap timer”:
Thismodeallowsyousaveaspeciclaptime.
Tapthe“Start”buttontostarttiming.Then,tapthe“Lap”buttontosavealaptime.Tostoptiming,tapthe“Reset”
button.
 Aftereach activationofthe“Lap” button,thecurrentlap timeisdisplayed intheLCdisplay forabout3
secondsandthensaved.Duringthistime,thetimercontinuestooperatenormally.
“Lap memory”:
This mode shows all saved lap times. You can save a maximum of 100 lap times.
Tapping„Lapmemory”willopenasub-menuandthesavedlaptimeswillbedisplayed.Thesevaluesareretained
after deactivation of the transmitter as well.
Ifthesymbolfor„Restoration”isselectedinthedisplay,theselaptimescanbedeleted(conrmwith„yes”).The„Lap
Timer”mustbeactivelyendedbyselecting„Uptimer”or„Downtimer”.
15.21 “Keys function” function
This function enables you to assign functions for the individual trim
buttons.
Tap the trim button to assign a given function to it. This will open a
menu.Fromthemenu,selectfromtheavailablefunctions.Tapthe
“Back” button to save the new values and return to the previous
menu.
Switchable functions can be assigned in any submenu of the swit-
ches(e.g.“SW1toSW3”)ortrimmer(TR1toTR5).Youneedto
scroll the display content for overview. The main display shows the
corresponding icon with the function activated.
Figure 32