User manual

36
Figure 22
“Master channel”:
Here,youselecttheMasterchannel.
“Slave channel”:
Here,youselecttheSlavechannel.
“Low side mix”:
Theinuenceofthe“Leftservocontroldevice”ofthemasterchannelontheslavechannelisdetermined.
Ifyouset0%orapositivepercentage,theslavechannelisnottriggeredwhenthe“Highsidemix”isdeactivated.
Thesettingsfor“Lowsidemix”and“Highsidemix”inuenceeachotherwiththe“Highsidemix”activated.Theslave
servowouldnotbetriggeredwithasettingLowsidemix=100andHighsidemix=-100,sincethetwosetvalueswill
balance each other out.
“High side mix”:
Theinuenceofthe“Rightservocontroldevice”ofthemasterchannelontheslavechannelisdetermined.
Ifyouset0%oranegativepercentage,theslavechannelisnottriggeredwhenthe“Lowsidemix”isdeactivated.
Thesettingsfor“Lowsidemix”and“Highsidemix”inuenceeachotherwiththe“Highsidemix”activated.Theslave
servowouldnotbetriggeredwithasettingLowsidemix=100andHighsidemix=-100,sincethetwosetvalueswill
balance each other out.
“Offset”:
Here,youintroduceanOffsetvaluetotheSlavechannel.AnegativevaluepushestheSlavechanneltoitssmallest
point.