User manual

35
15.17 “Brake mixing” function
This function enables you to control the brakes using two or three
independentservos.TheChannels3(CH3)or4(CH4)areused
asslave channels for the accelerator/brake servo, whereby only
thebrakingfunctionhasaninuenceontheslavechannels.After
activatingoneofthetwochannels,youcansettheA.B.S.aswell
astheexponentialfunctionoftheaccelerator/brakeservoforthis
channel individually.
Since up to three servos can be activated for a brake
function,youhavemanyoptionsforprogramming,e.g.,a
kindof“Brakeforcedistributor”.Duetothemanyoptions,
wecannotprovideanymorespecicindicationforpro-
gramming in these operating instructions.
Select the parameter to be changed. Slide the regulator to the right
orlefttochangethevaluetosuityourrequirements.Tapthe“Back”
button to save the new values and return to the previous menu.
15.18 “Mixes” function
This function allows you to control two servos at the same time.
The electronic proportion of the main channel (Master) is mixed
toa furtherchannel (Slave)to dothis.Youcan setthe direction
individually. You can mix between all four channels.
Selectaparameter tobemixed. Selectthe “Activate/Deactivate”
button. Slide the regulator to the right or left to change the value to
suityourrequirements.Tapthe“Back”buttontosavethenewva-
luesandreturntothepreviousmenu.Tapthe“Activate/Deactivate”
button to deactivate the set value.
Figure 27
Figure 28