User manual

15.4 “Subtrims” function

Figure 14

This function enables you to make an individual setting for the middle position of the drive and steering servos. A slight

pullofthemodeltotheleftcanbeequalised/correctedwiththehelpoftrimming.Thisensurescorrectstraightforwards

steering when the control wheel on the transmitter is in the middle position.

Select the parameter to be changed to do this. Slide the regulator to the right or left to change the value to suit your

requirements.Tapthe“Back”buttontosavethenewvaluesandreturntothepreviousmenu.

 TheadditionalchannelsCH3andCH4donothaveanycentrepositionlikeCH1andCH2.Thefunction

“Subtrim”inuencesthelimitpositionoftheservosCH3andCH4nevertheless.Togetherwiththefunction

“EndPoints”,youcanindividuallysettheendvaluesforCH3andCH4.