User manual

24
“Boat mode”: Boat mode
“Brake mixing”: Brake mixer
“Mixes”: Channel mixer
“Displayservos”: Displayforpositionofallservolevers
“Race timer”: Timer
“Keys function”: Assignment of functions for trim buttons
“Models” Model management
„S.V.C.“: „Smartvehiclecontrol“(specialreceiverwithintegratedgyrosystemisneeded;availa-
bleasanaccessory)
“RX setup”: Settings for the receiver
„Spectrum analyzer“: Radio channel monitoring
“System”: Settings for the transmitter
15.2 “Reverse” function
This function can be used to change the servo rotation direction of
allfourchannels(CH1toCH4)asrequired.Dependingontheins-
tallationpositionandthesteeringinthemodel,itmaybenecessary
to change the direction of rotation of a servo.
Forthis,taptheswitchtochangetheservorotationdirectionofthe
requiredchannelfromNormal(NOR)toReverse(REV).
Figure 12