User manual

12
Middle position of the drive function
Usingthetrimmingbutton(TR3)forthedrivefunction,setthemiddlepositionforthegasservo(TH).Todothis,press
thetrimmingbutton(TR3)eithertotheleftortotherightinordertosetthevalueto0.Ifyouholddownthetrimming
button,thevaluewillbechangedconstantly.Thevaluecanbeadjustedbetweenleftandrightatupto120stepseach.
 Every shortoperation of theprogramming and settingbuttons is conrmedby an acoustic signal when
the“Systemsound”settingisactivated.Ifabuttonispushedforalongerduration,thevalueswillchange
continuallyandthetransmitterwillemitafastsequenceofsounds.
 Whenyouperformtrimming,a sub-menu willopen.Thedisplaywillshowtrimming forsteeringandthe
throttle/brakeleverinlargeformat.Whenendingtrimming,thisdisplaywillautomaticallyreturntothebasic
menu. The set trim value is also displayed here.
Also set the middle value precisely if you are using an electronic cruise control in place of a gas servo.