User manual

User Manual of Brushless Speed Controller
3.8. Throttle Neutral Range: Please see the following illustrations to adjust the neutral range as your like.
Top point of maximum throttle
Brake and backward zone
Top point of maximum brake
Top point of
maximum brake
Brake and
backward zone
Neutral point
Neutral zone
Top point of
maximum throttle
Forward
zone
Forward zone
Neutral zone
Neutral point
3.9. Timing:Therearemanydifferencesamongstructuresandparametersofdifferentbrushlessmotors,soaxedtiming
ESCisdifculttocompatiblewithallbrushlessmotors.Itisnecessarytomakethetimingvalueprogrammable.Pleaseselect
the most suitable timing value according to the motor you are just using. Generally, higher timing value brings out higher power
output,butthewholeefciencyofthesystemwillbeslightlylowerdown.
3.10. Over-Heat Protection: If the function is activated, the output power will be cut-off when the temperature of the ESC is
uptoafactorypresetthresholdformorethan5seconds.Whentheprotectionhappens,theGreenLEDwillash.
4. Reset All Items To Default Values
At any time when the throttle is located in neutral zone (except in the throttle calibration or parameters program process), hold
the“SET”keyforover3seconds,theredLEDandgreenLEDwillashatthesametime,whichmeanseachprogrammable
item has be reset to its default value. It needs to be restarted to complete the whole process.
USER MEMO
Page - 4 -