User manual

13. Technical Data

Scale .....................................................1:10

Suitable drive battery ............................2-cell LiPo driving battery (rated voltage 7.4 V) in hardcase build

(6-cell NiMH rechargeable battery with a rated voltage of 7.2 V is possible as

well, but you need to build a suitable battery holder yourself)

Suitable motor/speed controller ............Matching 1:10 onroad vehicles, designed for the above battery types

Suitable steering servo .........................Highspeed servo in standard size (approx. 20.5 x 40.5 mm)

Required Remote Control System ........2 channels

Drive .....................................................Four wheel drive via toothed belt

Rear axle with stiff axle (without differential)

Front axle with freewheel (for reversing) or stiff drive (for driving forward)

Completely with ball bearings

Chassis .................................................Single-wheel suspension, double transverse link

Oil pressure shock absorber with spiral springs, adjustable

Wheel alignment of the front wheels can be set

Front and rear axle camber can be set

Mechanical lowering possible

Stabilisers at the front and rear axles (not pre-installed but contained separa-

tely in the scope of delivery)

Dimensions (L x W x H) ........................365 x 207 x 70 mm (without car body)

Tyre dimensions (W x Ø) ......................27 x 63 mm

Wheel base ...........................................260 mm

Ground clearance .................................10 mm

Weight ..................................................640 g (without motor, speed controller, steering servo, receiver, drive battery,

car body)

Low deviations in dimensions and weight are due to production technical reasons.