Instructions

23
• Make sure you have been sufciently trained and are fully aware of any contingency plans before accidents hap-
pen.
• Make sure you have a ight plan and never y the aircraft recklessly.
• Respect the privacy of others when using the camera. Make sure you comply with local privacy, regulations, and
moral standards.
• Do not use this product for any reason other than general personal use.
• Do not use this product for any illegal or inappropriate purpose (such as spying, military operations, or unauthor-
ized investigations).
• Do not use this product to defame, abuse, harass, stalk, threaten or otherwise violate the legal rights (such as the
right of privacy and publicity) of others.
• Do not trespass into private property of others.
2.4 Individual parts
2.4.1 Regarding genuine and functional parts
To avoid component malfunction, serious injury, and property damage, observe the following rules:
• Use only genuine manufacturer parts or parts certied by the manufacturer. Parts of other origin can cause the
system to malfunction and compromise safety.
• Ensure there are no foreign objects (such as water, oil, soil, sand, etc.) inside of the aircraft or its components.
• Ensure the aircraft and its components including but not limited to the remote controller, camera, gimbal, compass,
propulsion system, and battery are all in good working order, undamaged, and functioning well.
2.4.2 Remote controller
• Ensure the remote controller is fully charged before each ight.
• When the remote controller is powered on and has not been used for 9 minutes, the LED indicator on the right-
hand side will change from solid green to ashing red. One minute later, it will give out a “beep” sound and power
off automatically.
• Adjust the clamp of the mobile device holder to allow a rm grip on your mobile device.
• Ensure the antennas of the remote controller are unfolded and adjusted to the proper position to achieve optimal
transmission quality.
• Repair or replace the remote controller if damaged. A damaged remote controller antenna will greatly decrease
performance.
• Linking is required if you wish to replace your remote controller or receiver or add a new remote controller.
• Fully charge the battery at least once every three months to maintain battery health.
2.4.3 Gimbal
• Precision elements in the gimbal may be damaged in a collision or impact, which may cause the gimbal to function
abnormally.
• Do not apply external force to the gimbal after the gimbal is powered on.
• Do not add any payloads to the gimbal, as this may cause the gimbal to function abnormally or even lead to motor
damage.