Instructions

35
7.2.2 Calibrating
Thecalibrationprocedurecomprisestwosteps:(1)horizontaland(2)verticalcalibration.
Requirements
• Your mobile device is connected to the Drone-xxxxxx (serial number) or Controller-xxxxxx (serial num-
ber) network.
• Your environment is free from magnetic interference.
1. Inyourmobileapp,tapon●●●toopenthemenu.
2. TaponCOMPASS CALIBRATION to start calibrating.
- Theindicatorlightsontheaircraftalternatelyashredandblue.
3. Followthein-appinstructionstocompletethecalibrationprocedure.
Theappwillremindyouwhichsteptoperform.
(1) Horizontal calibration (2) Vertical calibration
1.Puttheaircraftinyourhand.
2.Rotateithorizontallyuntiltheindicatorlightsalter-
natelyashredandgreen.
1.Puttheaircraftinyourhand.
2.Rotateithorizontallyuntiltheindicatorlightsalter-
natelyashredandgreen.
3.Holdtheaircraftinyourhandwithitsnosefacing
up.
4. Place the aircraft on the ground and then rotate it
horizontally until theindicator lights are greenor
ashgreen.
Ifyouseeredstatusindicatorlights,thecalibrationprocedurefailed.Repeatthecalibrationprocedure.