Instructions

34
7. Maintenance
7.1 Pairing aircraft and remote controller
Whenyoureplaceyourremotecontroller,itisnecessarytopairitwiththeaircraftbeforeyoucanuseitasfollows:
1. Switch on the aircraft and the remote controller.
2. GotothenetworksettingsonyourmobiledeviceandviewavailableWiFinetworks.Takedowntheserial
numberoftheremotecontroller:
- Controller-xxxxxx (hexadecimal)
3. ConnectyourmobiledevicetotheDrone-xxxxxx(hexadecimal)network.
4. Inthemobileapp,tapon●●●toopenthemenu.
5. Go to Pair RC then tap on Pair. A dialogue box will pop up.
6. EnterthepreviouslyrecordedserialnumberthentaponPairtoconrm.
Waitforthepairingtocomplete.Successfulpairingisindicatedasfollows:
- Yourmobiledeviceshouldlisttwonetworks:Drone-xxxxxx and Controller-xxxxxx. Both must show the same
serial number.
- Therearindicatorlightsontheaircraftashgreenoraresolidgreen.
7.2 Calibrating the compass
Remember
• Keepawayfromenvironmentswithmagneticinterferencetopreventfailing.
• Duringusage,iftheaircraftindicateswith“alternatingashingblueandgreenlights”,whichmeansthatthe
compassisabnormal,pleasere-calibratethecompass.
7.2.1 When to calibrate the compass
Calibratethecompassifoneofthefollowingconditionsismet:
• Youareyingatanewsite.
• Theaircraftstatusindicatorlightsindicateacompasserror.
• Themobileapppromptsyoutocalibratethecompass.
• Erraticbehaviourduringight(suchasdrifting)thatcannotbeexplained.