Instructions

14
5.3.2 Linking mobile app and remote controller
Requirements
• Yourmobiledevicecanconnectto5GHzWi-Finetworks.
• You have installed the mobile app GeNii Mini(scanQRcodetotheright or
download it from the respective app store).
• (Recommended)Youhaveinstalledthemobilesupportontheremotecon-
troller.
Linkmobiledeviceandremotecontroller:
1. TurnonWi-Fionyourmobiledevice.
2. Select the Controller-xxxxxx (serial number)networktolinkyourmobiledevice.
3. OpentheappandselectStart Flyingtoentertheoperationinterface.Note:ItcantakeawhilefortheStart
Flying button to show.
StartFlying
5.3.3 Calibrating the compass
Calibratethecompasswheneveryouchangeyingsites.
Referto7.2 Calibrating the compass for instructions.
5.4 Flying – Taking off
Remember
• WhenyouturnontheaircraftthePosition Flight Modeisactivatedbydefault.
• Itishighlyrecommendedyouonlytakeoffaftertheindicator light on the aircraft turns solid green (strong
GPS signal).
• Chooseawideandopenightenvironment.Tallbuildingsandmetalmaterialsmayinterferewiththecom-
passandGPSequipmentontheaircraft.
• IfyouareabeginneryoucanenableBeginnermodeinthemobileapp,whichonlypermitstake-offwhen
theGPSsignalissufcient.