Instructions

11
4.3 Getting the remote controller ready
Ifyouintendtocontroltheaircraftwiththemobileapp,youdonotneedtoreadytheremotecontroller.
4.3.1 Checking the battery level
Ontheremotecontroller,pressthe<power>buttonfor2secondstoturniton.Observetheindicatorlight:
G
Greensolid:batterylevelissufcient.
G
Greenblinking:batterylevelislow.Chargethebattery.See4.3.2 Charging the battery.
4.3.2 Charging the battery
Warning:Disconnectthechargingcablebeforeusingtheremotecontroller.
Indicator Light
Householdpowersocket
USB adapter
USB charging cable
Indications
G
Blinkinggreenlight(Charging)
G
Solidgreenlight(Batteryfullycharged)
4.4 Installing an SD card for media storage
Picture and videos are saved to the SD card for storage.
InsertamicroSDcard(max.32GB/class10orUHS-1required)intotheslot.
InserttheTFcard(Maxcapacity:32GB.Class10orUHS-1ratingrequired)intothe
TF
NOTICE
Data loss: Before installing or removing the SD card turn the aircraft off.