Instructions

34
9.3 Return-To-Home
9.3.1 Introduction
Return-To-Homeisnotaightmodebutaightassistancefeature:itreturnstheaircrafttobaseautomatically.
When the aircraft operates in Position Flight Mode, Return-To-Home can be activated in two ways:
• By the pilot: the aircrafts returns to base automatically. This is useful in case you lose control or sight of the aircraft.
• By the aircraft: when the remote controller loses the signal.
How it works after activation:
• iftheaircraftiesbelow30meters,theaircraftwillautomaticallyascendto30metersbeforereturninghome.
• iftheaircraftiesabove30meters,theaircraftwillreturnhomeatthecurrentaltitude.
Remember
• Use the Position Flight Mode in combination with Return-To-Home.
• For Return-To-Home to work, the aircraft must be able to record the GPS coordinates before take off, and
be receiving a good quality GPS signal.
• Keepyouryingpathfreeofobstaclestoavoidaccidents.Flytheaircraftinopenatterrain(notallbuildings
withina50meterradiusandatterrainwithina10meterradius).
9.3.2 Activating
Activate and use the Return-To-Home function as follows:
1. In Position Flight Mode, press the <One Key Return> button to activate Return-To-Home.
- A continous buzzer sounds.
- Do not control any functions during the process of return or ascent.
- If you want to cancel the function, hold down the <One Key Return> button until the buzzer stops.
2. When the aircraft is landing, you can use the joystick to guide it to the desired landing position.
3. After the aircraft has landed and the motors stopped, shut it off completely.