Instructions

29
7.5 Powering on and initializing the aircraft
WARNING
Always power on the remote controller before you turn on the aircraft to prevent accidents.
1. Puttheaircraftonaatsurface.
2. Power on the remote controller. Hold down the <Power> button for 2 seconds (Fig. A).
3. Power on the aircraft:
- Push the <Power> button once (1x), then hold down the <Power> button for 2 seconds (Fig. B).
- The initializing tune plays.
4. Wait for the self-inspection and frequency matching procedure to complete.
- The procedure takes about 30 seconds.
- Whentheindicatorlightsturnfromashingorsolidbluetoashingorsolidgreentheprocedureiscompleted
(Fig C).
sseeee
Fissssssss
Fig. A sss Fig. B
Fissssssss Fig. C