Instructions

27
7. Before flying
7.1 Introduction
This section assumes you will control the aircraft with the remote controller. The aircraft can also be controlled through
the mobile application (refer to the full operating instructions for details).
Youcangettheaircraftreadyforightinafewsteps:
1. Chargetheightbatteryandtheremotecontrollerbattery.
2. Installtheightbattery.
3. Initialize the aircraft and run the self-inspection procedure.
4. Linkthemobileapptotheremotecontrollerfordisplayingofrealtimeightdata.
7.2 Charging the aircraft battery
WARNING
• Make sure you have read and understood the safety instructions related to batteries.
• Charge batteries in a well-ventilated environment and keep away from heat sources.
• Donotchargebatteriesnexttoammableoronthesurfaceofelectro-conductiveobjects.
• Monitor batteries while they are charging.
1. ConnecttheUSBchargingcabletotheightbatterycharger.
2. Connect the end of the charging cable to a USB power supply. CAUTION! Do not charge on a computer USB
port.
3. Insert the aircraft battery into the charger as shown below.
Indications
Blinking green light (Insert a battery)
Blinking red light (Charging)
Solid green light (Battery fully charged)