User manual

• Checktheconnectionbyclicking"Flightdata"inthebottomlineinthesoftware(seegure35,item2).Ifyoumove

theracecopternow,thevirtualquadrocoptershowninthesoftware(gure35,item1)mustmoveaccordingly.

c) Setting the Control Stick Positions

Sincetheightcontrolispre-programmed,therequiredsettingsarelimitedtoadjustmentofyourremotecontrolto

the stick positions.

Enterthemenu"Conguration"(gure36,item2)andselectthebutton"Input"(gure36,item1)there.

Now check if your stick movement at the transmitter goes from "min" to "max" in the software. The changes to the stick

position are displayed "live" in the software. Updating can take a few milliseconds!

Theightmodeswitchmustreachpositions1,2and3toworkproperly.

Whenyouhaveseteverything,youcansaveyoursettingswith"Save"(gure36,item3).

Disconnect the racecopter from the power supply and the USB connection. You can close the programme.

Taketheracecopterintooperationasdescribedinchapter10;thefunctiontestandtrimmust,ofcourse,beperformed

according to the operating instructions of the remote control system used by you.

 ThesoftwareoftheCC3D-ightcontroloffersagreatmanyoptions.Itwillpayofftodealwiththisinmore

detail, to adjust the racecopter to your needs.

Figure 35

Figure 36