User manual

b) Installation of the Software, Make Connection

• Installthe"OpenPilot"software(atleastversion15.02.xxx)or"LibrePilot".

• Switchonyourtransmitter.

• Connectthequadrocoptertotheightcontroller.ConnecttheMiniUSB-socketoftheracecopterightcontrol(gure

33, item 1) to a USB port of your computer.

• Startthesoftware"Openpilot"/"Librepilot";thesoftwareconnectstotheracecopterautomatically.Ifthisisnotthe

case,check inthe Windowsdevice manager,"Com-Ports/SerialInterface" whetherthe ightcontrol hasbeen

installed properly.

Figure 34 shows the start menu of the "Openpilot" software (may change in newer versions).

1 Openconguration

2 Toolbar for quick switching between the menus

3 Connecttotheightcontrol

Figure 33

Figure 34