User manual

14. Installation of Camera and FPV Transmitter

TheracecopterispreparedforholdinganFPV-system("FirstPersonView").Thisway,youcanviewtheightof

the racecopter in connection with video glasses as if you were sitting directly in the "cockpit". The camera, the FPV

transmitter and the required accessories are not part of the RtF or ARF version, but must be purchased separately.

 ObservethestatutoryprovisionsofyourcountryfortheFPVight.

For video transfer from the racecopter to the pilot, e.g., the following accessories are needed:

• Camera

• 5.8GHz-transmitterandmatchingaerial

• Monitorand/orvideogoggles

• 5.8GHz-receiverandmatchingaerial

For the ground station, you can use a screen or video glasses, or both (provided that the receiver has two separate

video outputs for this).

If the video glasses already have a 5.8 GHz receiver installed, you do, of course, not need any separate

receiver. The video goggles may even offer a video output that can be used to record the video signal.

Thefollowingguresshowexamplesofcomponentsthatcanbeinstalledintheracecopter.

1 Aerial (Spironet)

2 5.8 GHz-FPV-transmitter

3 Connection cable video transmitter/camera

4 FPV camera

Figure 26