User manual

13. Simulator/Student Transmitter Function

If required, you can also use the transmitter at the PC for simulations or games. In this case, you will require the

optionalUSBcable(Conraditemno.517956)andsuitablecomputersoftware(e.g.ightsimulationgames,etc.).

The USB cable is connected to the PS/2 interface socket

(1) at the rear of the transmitter.

At correct connection and proper installation, the acti-

vated transmitter is recognised by the operating system

(e.g. at least Windows XP or higher required) and can be

used like a commercial joystick.

For all further information on this, see the operating in-

structions of the USB cable.

Alternatively, the signal output of the remote control may

be used to control a teacher transmitter. In this case,

the remote control "HT-4" acts as the student transmitter.

Further information on this can be found in the operating

instructions of the teacher transmitter.

Figure 25