User manual
65
Nod trimming
If the racecopter tries to drift forward, reduce the speed
until the racecopter is standing safely on its landing
struts again. Now push the trim button for the nodding
function(alsoseegure21)downortowardsyourbody
several times.
Push the pitch stick carefully forward and check if the
adjustment was sufcient. Repeat the procedure until
the model does not show any tendency to drift forward.
If the racecopter tries to drift backwards, push the trim
button for the nodding function up or away from your
body.
Pitch trimming
The trim button for the pitch function (see gure 22)
should remain set in the middle position.
Otherwise, it is possible that the electronic system in
the racecopter does not recognise the bottom position
ofthe control stick for thepitch functionproperly; the
installed protective voltage will then prevent the motors
from starting up.
Figure 21
Figure 22










