User manual

69
14. Optional camera
Duetothegoodightpropertiesandthecircumstancethatthedrivemotorisinstalledonapylonbehindthewing,the
ightmodel"WildHawk"isalsooutstandinglysuitableasacameracarrier.
Necessary accessories and a camera are not part of the delivery and must be purchased separately. For this, also use
the accessories offered for the model for orientation. The rear area of the canopy is recommended as the mounting
site. Due to the many offered systems, installation must be at your own discretion.
 Ifacameraisinstalledintheightmodel,alwaysobservetheprovisionsandlawsapplicableforthisinyour
country.
15. Maintenance and Care
Regularly check the rudder linkages and the control functions of the servos on your model. All moving parts have to
be easily movable but there should not be a clearance in the bearing.
The outside of the model should only be cleaned with a soft, moistened cloth. Never use any aggressive cleansing
agents or chemical solvents, since this might damage the surfaces.
Important!
If you have to replace any damaged or worn parts, only use original replacement parts.
The spare parts list is located on our website www.conrad.com in the download section for the respective product.