Manualshelf

User manual

ManualsBrandsREELY ManualsRC Model AircraftsRC model glider RtF 1650 mm
61626364656667686970
64
12. Propeller change
If the propeller must be replaced due to damage, remove the spinner cap by turning out the attachment screws of
the spinner (1).
Every propeller blade is anchored to the propeller hub with a screw and a stop nut (2). Removing the screw permits
replacement of the damaged propeller blade. After replacement the screw must be secured with the stop nut again in
the manner that permits the smoothest possible movement of the propeller blade with the least play.
Figure 18