User manual

Ifthecontrolstickfortheelevatorfunctionismovedup,theelevatormustdeectdownwards.Therearrudderedge

mustbedeecteddownwardsbyapprox.12mm.Inight,thelandinggearispressedupwardsandthemodeldives.

This control function is required to put the model into a normal light position if it wants to ascend too much due to a

control error or a gust of wind.

Figure 11

Aileron function

Ifthecontrolleverfortheaileronfunctionismovedtotheleft,theleftwing'saileronmustbreakouttothetopandthe

aileronoftherightwingtothebottom.Therearrudderedgemustbedeectedordownwardsorupwardsbyapprox.

12mm.Inight,thispressesthewingtothelowerleftandthemodeliestotheleftwithalittleelevatorsupport.

Figure 12

Ifthecontrolleverfortheaileronfunctionismovedtotheright,theleftwing'saileronmustbreakouttothebottomand

theaileronoftherightwingtothetop.Therearrudderedgemustbedeectedordownwardsorupwardsbyapprox.

12mm.Inight,thispressesthewingtothelowerrightandthemodeliestotherightwithalittleelevatorsupport.

Figure 13