User manual

b) Mounting the Elevator and Rudder Linkage Rods

Puttherudderhornsoftheservosforelevatorandrudderatprecisely90°totheservocasing(alsoseegure8,

item 4 + 5).

Shorten the rods for elevator and rudder at the dampening areas by twisting the clevises in or out so that the dampen-

ing surfaces are in neutral position.

Screw the clevises at the rudder horns on with a suitable tool so that the clevises move freely with a little play

(1 and 2).

For elevators and rudders, the clevises should be attached to the second-to-last, outer hole of the rudder horn for the

rstights.Thecorrectfunctionisexplainedinchapter"CheckingtheControlFunctions".

Figure 4