User manual

44
• Ifyouhavereasontoassumethatsafeoperationisnolongerpossible,disconnectthecharger/mainsadapterim-
mediately and secure it against inadvertent operation.
It can be assumed that operation without danger is no longer possible if the charger/mains adapter has any visible
damage, the charger/mains adapter no longer works, after extended storage under unsuitable conditions or after
difculttransportconditions.
First deactivate all sides of the mains socket to which the mains adapter for the charger is connected (e.g. switch off
the respective fuse or turn out the fuse. Then deactivate the FI protection switch). Then unplug the mains adapter
from the mains socket.
Do not use the charger/mains adapter after this anymore, but take it to a specialised workshop or dispose of it in an
environmentally compatible manner.
c) Before Commissioning
• Performsuitableteststoensurethatyourremotecontrolisnotimpairedbyconcurrentoperationofseveral2.4
GHz-remote control systems and that your remote control does not impair any other models in their function.
• Regularlycheckthefunctionalreliabilityofyourmodelandtheremotecontrolsystem.Watchoutforanyvisible
damage such as defective plug connections or damaged cables. All moving parts on the model must run smoothly
but must not have any tolerance in the bearing.
• Therechargeablebatteriesrequiredforoperation(e.g.remotecontroltransmitters,ightbattery)mustbecharged
accordingtothemanufacturer'sspecications.
• Ifbatteriesareusedasatransmitterpowersupply,makesurethattheyhavesufcientremainingcapacity(battery
checker). If the batteries are empty, always replace the complete set, never individual cells only.
• Beforeanyuse,thetrimmingsettingsatthetransmittermustbecheckedforallcontroldirectionsandadjustedif
required.
• Alwayscheckiftherotoriscorrectlyandsecurelyinstalledbeforeoperatingtheproduct.
• Regularlyexamplethepropellerfordamage.Damagedpropellersposeadangerandnolongermustbetakeninto
operation.
• Alwaysswitchonthetransmitterrst.Onlythencanthereceiversystembetakenintooperationbyconnectingthe
ightbatteryinthemodel.Otherwise,theremaybeunpredictableresponsesandtherotormaystartunintentionally.
• Makesurethatnoobjectsorbodypartsareintherangeorthesuctionareaoftherotorwhileitisrotating.