Data Sheet

TENSILE STRENGTHS ACCORDING EN 10270-1, TABLE 3
The tensile strength of straightened rods can bei up to 10% lower.
Diameter SH (Rm, lower limit) SH (Rm, upper limit) DH (Rm, lower limit) DH (Rm, upper limit)
0.05 2800 3520
0.06 2800 3520
0.07 2800 3520
0.08 2800 3480
0.09 2800 3430
0.1 2800 3380
0.11 2800 3350
0.12 2800 3320
0.14 2800 3250
0.16 2800 3200
0.18 2800 3160
0.2 2800 3110
0.22 2770 3080
0.25 2720 3010
0.28 2680 2970
0.3 2660 2940 2660 2940
0.32 2640 2920 2640 2920
0.34 2610 2890 2610 2890
0.36 2590 2870 2590 2870
0.38 2570 2850 2570 2850
0.4 2560 2830 2560 2830
0.43 2530 2800 2530 2800
0.45 2510 2780 2510 2780
0.48 2490 2760 2490 2760
0.5 2480 2740 2480 2740
Data sheet : Patented Drawn Spring Steel Wire
(SH/DH)
Page 8 of 11
All statements without guarantee
Stahl-Becker GmbH
Ottostraße 9-11
63150 Heusenstamm
Germany
Phone: [phone]
Fax: [phone]
www.stahlbecker.com
[e-mail]