Data Sheet

TOLERANCE IN LENGTH ACCORDING EN 10270-1, TABLE 7
For all values: - 0 mm.
2,35 ≤ d < 2,78 -0.025 0.065
2,78 ≤ d < 3,01 -0.03 0.075
3,01 ≤ d < 3,35 -0.03 0.08
3,35 ≤ d < 4,01 -0.03 0.09
4,01 ≤ d < 4,35 -0.035 0.1
4,35 ≤ d < 5,01 -0.035 0.11
5,01 ≤ d < 5,45 -0.035 0.12
5,45 ≤ d < 6,01 -0.04 0.13
6,01 ≤ d < 7,12 -0.04 0.15
7,12 ≤ d < 7,67 -0.045 0.16
7,67 ≤ d < 9,01 -0.045 0.18
9,01 ≤ d < 10,01 -0.05 0.2
10,01 ≤ d < 11,12 -0.07 0.24
11,12 ≤ d < 12,01 -0.08 0.26
12,01 ≤ d < 14,52 -0.08 0.3
14,52 ≤ d < 17,34 -0.09 0.35
17,34 ≤ d < 18,37 -0.09 0.37
18,37 ≤ d < 20,01 -0.1 0.4
Diameter d Lower limit Upper limit
Length (L) Class 1 Class 2 Class 3
L ≤ 300 + 1,00 mm + 1 % 0.02
300 < L ≤ 1000 + 2,00 mm + 1 % 0.02
1000 < L 0.002 + 1 % 0.02
MECHANICAL PROPERTIES
Data sheet : Patented Drawn Spring Steel Wire
(SH/DH)
Page 7 of 11
All statements without guarantee
Stahl-Becker GmbH
Ottostraße 9-11
63150 Heusenstamm
Germany
Phone: [phone]
Fax: [phone]
www.stahlbecker.com
[e-mail]