Data Sheet

TOLERANCE OF THE DIAMETER OF STRAIGHTENED RODS ACCORDING EN 10270-1,
TABLE 8
All dimensions in mm.
11 ± 0,070
12 ± 0,080
12.5 ± 0,080
13 ± 0,080
14 ± 0,080
15 ± 0,090
16 ± 0,090
17 ± 0,090
18 ± 0,090
19 ± 0,100
20 ± 0,100
Diameter Tolerance
Diameter d Lower limit Upper limit
0,05 ≤ d < 0,12 -0.005 0.007
0,12 ≤ d < 0,22 -0.005 0.008
0,22 ≤ d < 0,26 -0.005 0.009
0,26 ≤ d < 0,37 -0.006 0.012
0,37 ≤ d < 0,47 -0.008 0.015
0,47 ≤ d < 0,65 -0.008 0.018
0,65 ≤ d < 0,80 -0.01 0.022
0,80 ≤ d < 1,01 -0.015 0.03
1,01 ≤ d < 1,35 -0.02 0.04
1,35 ≤ d < 1,78 -0.02 0.045
1,78 ≤ d < 2,01 -0.025 0.055
2,01 ≤ d < 2,35 -0.025 0.06
Data sheet : Patented Drawn Spring Steel Wire
(SH/DH)
Page 6 of 11
All statements without guarantee
Stahl-Becker GmbH
Ottostraße 9-11
63150 Heusenstamm
Germany
Phone: [phone]
Fax: [phone]
www.stahlbecker.com
[e-mail]