User manual

51
11. Adjust Trimming
Trimming for the steering can either take place in the setting mode (see chapter 10. d) and e) or directly
while driving the vehicle (without having to call the setting menu).
a) Setting the Trimming for the Steering
• Switch on the transmitter. Wait until the display of the battery/rechargeable battery voltage appears and the trans-
mitter is ready for operation.
• Ifyoundwhensteeringthevehiclethatthevehicledrivestotheleftorrightintheneutralposition(middleposition)
of the steering wheel (3), you can change trimming for the steering with the button " " or " ". The display shows
the trimming value here. After approx. 3 seconds without pushing buttons, the battery/rechargeable battery voltage
will be displayed again.
b) Setting Trimming for Forward and Reverse Driving
• Switch on the transmitter. Wait until the display of the battery/rechargeable battery voltage appears and the trans-
mitter is ready for operation.
• Ifyoundwhensteeringthevehiclethatthevehicledoesnotstopintheneutralposition(middleposition)ofthe
control lever (2), you can correct the neutral position with the button "-" or "+". The display shows the trimming value
here. After approx. 3 seconds without pushing buttons, the battery/rechargeable battery voltage will be displayed
again.