User manual

111
• Thenconrmthebutton„DOWN“toswitchtothepitchcurve
forightmode„IDLE1“.
• The pitch curve is set according to the same pattern as for
ightmode„NOR“.
• Push that button „DOWN“ to set an individual pitch curve for
theightmode„IDLE2“and„HOLD“ifrequired.
• Push the button „CLEAR“ to get back into the overview of the
function setting menu.
Important:
 Pleaseobservethatthepitchandthrottlecurvesinuenceeachother.Ifyouliftthepitchcurveinaspecic
point, the larger angle of attack of the rotor blades may require lifting the throttle curve in this point as well.
Figure 43