User manual

74
Nod and roll function
Whenmovingthecontrolstickforthenodandrollfunc-
tion(alsoseegure1,item6)forwardandbackward,
the swash plate (1) must tip forward and backward as
well according to the control stick movement (see upper
imageingure15).
If you move the control stick for the nod and roll func-
tions to the right and left, the swash plate must tilt to the
rightandleftaswell(seebottomimageingure15).
If you switch the toggle switch for the swash plate path
limiter(alsoseegure1,item3)fromthefrontfrompo-
sition „0“ to the rear in position „1“, the path limitation of
theswashplateof70%isrevoked.
Theswashplatewillnowreactat100%ofthecontrol
path with much stronger tilting movements on the control
commands of the transmitter.
Forthersttestights,werecommendmovingthetogg-
le switch forward to the „0“ position and to switch on the
path limitation again.
Whenyouhavesecurelymasteredthehelicopterwith
the reduced swash plate movements, you can switch off
the path limitation of the swash plate and use the full
agility of the helicopter.
Figure 15